See What Customers Say About Us.

This fiber laser cutting machine has been running mainly for our sheet metal jobs. We make a lot of small parts and brackets like these, so there are usually many different shapes in one order. The cuts come out clean and the parts fit well when we move on to bending and assembly. We have been using it for our regular fabrication work here in the UAE and so far the experience has been good. It has made this type of work much more straightforward for us.

We bought this fiber laser cutting machine mainly for tube work, and it’s been a nice upgrade for our shop. We’ve been cutting stainless steel tubes with different angles and joints, and the bevel cuts have made a noticeable difference. The parts come off the machine pretty much ready for the next step, so we’re not spending as much time cleaning up or adjusting the cuts before welding. The setup took a little time to get familiar with, but once we got our settings dialed in, the results have been very consistent. It’s been working well for the type of tube fabrication we do.

At first, we were looking more at sheet cutting, but after using it, we found the tube cutting function very useful as well. We often get jobs with different materials and shapes, so having one fiber laser cutting machine for both sheets and tubes makes things easier for our workshop. The machine has been running well for our regular work, and we are getting used to the operation quite quickly. For us, it is a practical machine for different kinds of metal cutting jobs.

La verdad, estamos muy contentos con la máquina. La usamos principalmente para cortar lámina de acero al carbono y acero inoxidable, y hasta ahora ha funcionado muy bien. Los cortes salen limpios y precisos, y la mesa de corte extraíble nos resulta muy práctica para cargar y retirar las láminas. Esto nos facilita bastante el trabajo diario y también nos ayuda a ahorrar tiempo en la preparación de cada trabajo. En general, ha sido una buena máquina para nuestro taller y estamos satisfechos con el resultado.

We have been using this fiber laser cutter for our sheet metal work in Guatemala, mainly cutting carbon steel and stainless steel. The cutting quality has been very good, especially on detailed parts and different thicknesses. The machine is also quite easy for our operators to learn, and the software makes it convenient to prepare and adjust cutting jobs. What we like most is that the cuts come out clean with very little burr, so we spend less time on additional finishing. It has been a good addition to our workshop and has helped us handle our production more efficiently.

E kemi marrë këtë makinë kryesisht sepse na duhej një zgjidhje më kompakte për prerjen e tubave. Në punishten tonë hapësira është e kufizuar, kështu që përmasat e makinës ishin një nga gjërat që morëm parasysh. Deri tani jemi të kënaqur me mënyrën se si po punon.

Zakonisht presim tuba të rrumbullakët dhe katrorë për punë metalike, konstruksione dhe parmakë. Makina është relativisht e thjeshtë për t'u përdorur dhe operatori u përshtat me të pas pak kohe. Na pëlqen gjithashtu që mbetjet e tubit janë të vogla, sepse kur kemi shumë copa për të prerë, edhe kjo bën diferencë.

Për një punishte si e jona, nuk kishim nevojë për një makinë shumë të madhe. Kjo na përshtatet mirë sepse nuk zë shumë hapësirë dhe mund ta përdorim për punë të ndryshme. Deri tani ka qenë një zgjedhje e mirë për ne.

La compramos porque necesitábamos cortar lámina y tubo y no queríamos tener dos máquinas diferentes. Hasta ahora nos ha funcionado bastante bien. Trabajamos sobre todo con acero al carbono y acero inoxidable, y hemos usado la máquina tanto para lámina como para diferentes tipos de tubo.

Lo que más nos ha servido es poder hacer los dos trabajos con el mismo equipo. Antes teníamos que organizar el trabajo dependiendo de qué máquina estaba disponible, y ahora es mucho más sencillo. Los cortes han salido bien y la máquina ha sido bastante estable. Al principio nos tomó un poco de tiempo acostumbrarnos a los parámetros y a la parte de corte de tubo, pero después de unos días los operadores ya la manejaban sin problema.

Para el trabajo que hacemos en el taller, tener corte de lámina y tubo en una sola máquina nos está resultando bastante práctico.

We’ve had the 4020 fiber laser cutting machine running in the workshop for a while now. We bought it mainly because the old setup was getting a bit slow for the amount of sheet work we were doing. The two tables are probably the most useful part for us. We can get the next sheet loaded while the other one is cutting, which saves a fair bit of messing about during a busy day.

We’ve mainly been cutting mild steel and stainless so far. The cuts have been good and, more importantly, it’s been fairly consistent from job to job. The machine is obviously a big bit of kit, so getting it into the workshop and getting everything set up took some planning, but once it was up and running it was pretty straightforward for the lads to use.

We’ve had a few questions during the setup and CATEKCNC have been responsive when we’ve needed help. Overall, it’s doing what we bought it for and has made the day-to-day cutting work a lot less of a bottleneck.

We have been using this fiber laser cutter for our sheet metal work and overall we are very satisfied with it. The shuttle table is probably the feature we use the most because we can load the next sheet while the machine is still cutting. This saves quite a bit of time during the day. The enclosed design is also a big plus for our workshop since there is much less smoke and sparks around the working area. We mainly work with carbon steel and stainless steel, and the cuts have been clean and consistent. The CATEKCNC team also helped us during installation and with the initial settings, which made things much easier. For our production, it has been a good upgrade and we are happy with the choice.

The laser cutter arrived and we installed it recently. Everything went pretty smoothly. We mainly bought it for steel and stainless steel sheet cutting. The pull-out table is useful because we can load the material from the front without too much trouble. We had a few questions when setting up the machine, and the guys from CATEKCNC helped us. We haven't used it enough yet to say too much, but the machine is running well so far. Looking forward to getting it into our normal production.

We are using this fiber laser cutting machine in our workshop in Romania mainly for steel frames, doors, panels and other metal parts. The parts in the photos are some of the work we have been making with it. Before buying the laser, we had to do a lot of cutting by hand and use different machines for different jobs, so it was quite slow when we had many parts to prepare. Now we can cut the plates and profiles much more easily on one machine. The cuts are clean and the dimensions are good, which is important for us because most of these parts need to fit together later during welding and assembly. We also like that we can cut different tube and profile shapes instead of only flat sheets. It took us a little time to get used to the machine and the settings, but the CATEKCNC technicians helped us during installation and answered our questions when we started using it. So far, we are happy with the machine. It has made our daily work much easier, especially for custom metal structures where we often have different sizes and shapes to cut.

Just got the fiber laser cutting machine installed in our shop, so we haven't really put it into full production yet. First impression is good. The machine looks solid and everything arrived as expected.

The installation went pretty smoothly. We had a few questions during the setup, especially with the electrical connection and machine settings, but the CATEKCNC technical team was easy to reach and helped us get things sorted out. They also guided us through the software and basic operation, which was helpful for our operator.

We bought this machine mainly for cutting metal tubes in batches, so we're looking forward to getting some real production work through it. We haven't run enough jobs yet to give a review on long-term performance, but so far the installation and technical support have been a good experience.Hopefully we'll be putting it to work regularly very soon.